Dongguan Shijie Liwei carton factory
Service hotline:+86 138-2697-8928/+86 0769-86018983

Liwei carton

Paper packaging and printing manufacturer
4Common problem

What are the manufacturing processes of gift boxes?


The following is a brief introduction to the general process of processing and manufacturing high-grade gift boxes

1. Paper selection

According to the customer's document design requirements and the effect to be reflected, the selection of paper is very important

Common papers are: coated paper, black cardboard, art paper and so on. The paper should not be too thick. It is easy to wrinkle when mounting, but it should not be too thin, otherwise the convex effect cannot be reflected. The printing and coloring effect on the surface of coated carton is the best

2. Craft production

Manufacturing process of high-grade gift box

There are many surface decoration processes. The most common ones are offset printing, and then various processes based on this are:

1. Film covering (light film, dumb film, tactile film, scratch resistant film, etc.)

2. Hot stamping (gold, red gold, color gold, silver, laser, etc.); Local scraping of UV oil or screen ink; Embossing, etc

3. Die cutting: select appropriate gray board paper before die cutting. Of course, it must not be a very important link in the manufacturing process, especially the gift packaging box, which has higher technical requirements for die cutting. The accuracy and accuracy determine the product quality, and some errors directly affect the quality of subsequent processing

4. Slotting is a key step in the production of gift box. Before the gray board card is formed, the gray board must be V-shaped removed, so that after the gray board card is bent, the outside is straight and the inside is square, the edges and corners are clear, and the four corners match accurately

5. Pasting is a necessary process in the gift box process. According to the requirements of different products, copper paper, art paper, flannelette and leather materials are glued or sprayed through the gluing machine, and they are tightly pasted with the gray board to make them one

However, usually the packaging boxes are mounted first and then die-cut. Only the papered gift packaging boxes are die-cut first and then mounted. The purpose of doing so is: first, they are afraid of the contamination of outsourcing materials, which will affect the beauty; Second, the gift box pays attention to the harmony of the overall effect. Only after mounting can the support body be completely covered, so that the gray of the gray board is wrapped with novel outsourcing materials, presenting us with a beautiful artwork; Third, some box types with complex structure are still inseparable from manual pasting. This is not that machines cannot replace it, but that every detail of the box can be pasted in place by hand, so as to make the outer paper pasted more closely with the gray board

Service

Tel

Mr. Yang

+86 138-2697-8928

Tel

+86 0769-86018983

WeChat

WeChat